Thirteen published grades across three families — every specification verbatim from the TDS dated 19-DEC-2025, each with its own page and downloadable data sheet.
Seven grades, 99% Min aluminium throughout. Fatty-acid coating available per customer requirement.
General-purpose atomised aluminium powder — the standard fine grade of the TALTOM® family.
Application: [Application — TMPPPL to confirm]
View this grade →Finer atomised grade — 95% Min passing (-200) mesh for applications demanding tighter particle distribution.
Application: [Application — TMPPPL to confirm]
View this grade →Atomised dust grade with fatty-acid coating (2% Max), applied as per customer requirement.
Application: [Application — TMPPPL to confirm]
View this grade →Fine atomised aluminium dust — 80% Min passing (-325) mesh.
Application: [Application — TMPPPL to confirm]
View this grade →Coarse atomised grade of the CR series — -10 mesh = 100%, +30 mesh = 80%.
Application: [Application — TMPPPL to confirm]
View this grade →Coarse atomised grade of the CR series — -30 mesh = 90%, +100 mesh = 95%.
Application: [Application — TMPPPL to confirm]
View this grade →Coarse atomised grade of the CR series — -30 mesh = 90%, +100 mesh = 95%.
Application: [Application — TMPPPL to confirm]
View this grade →Pyrotechnic, paint and AAC gas-forming flake grades.
Pyrotechnic flake aluminium powder — high water coverage area and controlled fatty matter for explosive and firework compositions.
Application: Pyrotechnics & Explosives
View this grade →Flake aluminium powder for paint and pigment applications.
Application: Paints & Pigments
View this grade →Gas-forming flake grade for AAC block production — 100% water-miscible, 72 ml Min hydrogen evolution in 10 minutes.
Application: AAC Concrete Blocks
View this grade →Gas-forming flake grade for AAC blocks — 87% Min metallic aluminium, 85 ml Min hydrogen evolution in 10 minutes.
Application: AAC Concrete Blocks
View this grade →Finest TALCRETE® gas-forming grade — 94% Min metallic aluminium for AAC block production.
Application: AAC Concrete Blocks
View this grade →Leafing paste for metallic-finish paints and coatings.
Leafing aluminium paste for metallic-finish paints and protective coatings — 75% Min leafing value, 20,000 cm²/g Min water coverage area.
Application: Paints & Coatings
View this grade →Safe handling: aluminium powder is combustible, particularly in fine or flake form. Handle per the grade MSDS. TDS & MSDS available on request — info@tankeshwari.com.